TPS3839G18DQNR

TPS3839G18DQNR Overview

It is mounted through 4 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 4-XDFN Exposed Pad functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. 4 pins are on the supervisor. IC management can only work with a supply voltage of 900mV volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. You should set the supervisor's temperature during -40°C~85°C TA . While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 150nA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by TPS3839G18. Voltage supervisor can work with a supply temperature of 500nA at the most.

TPS3839G18DQNR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current

TPS3839G18DQNR Applications

There are a lot of Texas Instruments TPS3839G18DQNR Voltage Supervisors applications.

• Medical-specific insulation monitor
• Detection of phase loss
• Unattended substation automation
• Consumer electronics
• Power communication system
• Magnetic resonance imaging
• Leakage protection
• Analog circuit
• Satellite navigation
• WiFi router