TAS5630BDKD

TAS5630BDKD Overview

This package is embedded in 44-BSSOP (0.433, 11.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Tube case.As a consequence, there are 44 terminations, which involve ending a transmission line with a device matching the characteristic impedance of the line.The output it is configured with uses 1-Channel (Mono) or 2-Channel (Stereo) .The type of this electrical device is Class D .In a computer or other communication device, there are two pronged contacts called 44 pins.There is an electronic part mounted in the way of Surface Mount .Amp parts is powered by a voltage of 25V~52.5V volts.There are 2 channels available on the device.When operating, Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed 0°C~70°C TA °C.The number of pins is 44 .This chip belongs to Audio/Video Amplifiers .Amp parts belongs to the TAS5630 family.An electronic part such as this has a maximum output power of 480W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 10.8V .Vsup reaches 13.2V at the maximum.The device is powered by a voltage of 1250V volts.This item is part of the PurePath? HD series.Amp parts consumes 13.3mA of quiescent current wAmp partshout being affected by external factors.

TAS5630BDKD Features

44-BSSOP (0.433, 11.00mm Width) Exposed Pad package
44 pin count
TAS5630 family
480W kWh per hour
PurePath? HD series

TAS5630BDKD Applications

There are a lot of Texas Instruments TAS5630BDKD audio amplifiers applications.

• Portable electronic products powered by batteries
• Signal amplification
• ECG equipment
• Proportional operation circuits
• single/dual op amp sum and difference circuits
• Power control
• Signal operation
• Information processing
• Multiplication and division circuits
• Band-pass filter