SN74LVC112ADG4

SN74LVC112ADG4 Overview

The flip flop is packaged in SOIC. In total, it contains 2 elements. A total of 16 terminations have been made. A voltage of 1.8V provides power to the D latch. A device of this type belongs to the family of LVC/LCX/Z. It is mounted by the way of Surface Mount. Basically, it is designed with a set of 16 pins. Its clock edge trigger type is Negative Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 2 Bits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D latch operates on 3.3V volts. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. In this case, the high level output current is set to -24mA. There is no low level output current set at 24mA. Operating temperatures should be lower than 85°C. Ideally, the operating temperature should be greater than -40°C. The system operates with a minimum supply voltage of 1.65V. In this case, it supports a maximum supply voltage of 3.6V. This frequency can be achieved at 150MHz. This logic IC is J-K FLIP-FLOP. A total of 2 functions are provided by this T flip flop. It has 16 pins. With an output current of 24mA, this flip flop offers maximum design flexibility.

SN74LVC112ADG4 Features

16 pins
2 Bits
3.3V power supplies
2 Functions
16 pin count

SN74LVC112ADG4 Applications

There are a lot of Texas Instruments SN74LVC112ADG4 Flip Flops applications.

• Supports Live Insertion
• Frequency Divider circuits
• Buffer registers
• Count Modes
• Dynamic threshold performance
• 2 – Bit synchronous counter
• Test & Measurement
• Functionally equivalent to the MC10/100EL29
• Single Up Count-Control Line
• Data storage