SN74HC74DE4

SN74HC74DE4 Overview

The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). Package Tubeembeds it. T flip flop uses Differentialas its output configuration. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. A 2V~6Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. There is a consumption of 4μAof quiescent energy. Currently, there are 14 terminations. The object belongs to the 74HC74 family. Power is supplied from a voltage of 5V volts. A 3pFfarad input capacitance is provided by this T flip flop. It is a member of the HC/UHfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It reaches the maximum supply voltage (Vsup) at 6V. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this circuit is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. It is reported that there are 4 input lines.

SN74HC74DE4 Features

Tube package
74HC series
14 pins

SN74HC74DE4 Applications

There are a lot of Texas Instruments SN74HC74DE4 Flip Flops applications.

• Count Modes
• Balanced Propagation Delays
• Guaranteed simultaneous switching noise level
• Counters
• Safety Clamp
• Individual Asynchronous Resets
• Functionally equivalent to the MC10/100EL29
• Consumer
• Common Clocks
• CMOS Process