SN74HC174DBR

SN74HC174DBR Overview

The item is packaged in 16-SSOP (0.209, 5.30mm Width)cases. The Tape & Reel (TR)package contains it. T flip flop uses Non-Invertedas the output. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~85°C TA. The type of this D latch is D-Type. It belongs to the 74HCseries of FPGAs. Its output frequency should not exceed 50MHz Hz. A total of 1elements are contained within it. There is 8μA quiescent consumption. There have been 16 terminations. You can search similar parts based on 74HC174. The power supply voltage is 5V. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the HC/UHfamily. It is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility of this product is achieved by using 7 circuits. This D flip flop is well suited for TR based on its reliable performance. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It offers maximum design flexibility with its output current of 5.2mA. Currently, there are 3 lines of input.

SN74HC174DBR Features

Tape & Reel (TR) package
74HC series
16 pins

SN74HC174DBR Applications

There are a lot of Texas Instruments SN74HC174DBR Flip Flops applications.

• Data Synchronizers
• Control circuits
• QML qualified product
• Automotive
• Single Down Count-Control Line
• Communications
• Clock pulse
• Shift Registers
• Functionally equivalent to the MC10/100EL29
• Consumer