SN74AS174NSR

SN74AS174NSR Overview

The item is packaged in 16-SOIC (0.209, 5.30mm Width)cases. A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74ASseries FPGA. Its output frequency should not exceed 100MHz Hz. In total, it contains 1 elements. As a result, it consumes 45mA quiescent current and is not affected by external forces. A total of 16 terminations have been made. Members of the 74AS174family make up this object. Power is supplied from a voltage of 5V volts. Electronic devices of this type belong to the ASfamily. Surface Mount mounts this electronic component. With its 16pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. Due to its superior flexibility, it uses 7 circuits. Due to its reliability, this T flip flop is well suited for TR. If high efficiency is desired, the supply voltage should be kept at 5V. With an output current of 20mA, it is possible to design the device in any way you want. There are no output lines on the JK flip flop. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74AS174NSR Features

Tape & Reel (TR) package
74AS series
16 pins

SN74AS174NSR Applications

There are a lot of Texas Instruments SN74AS174NSR Flip Flops applications.

• Control circuits
• Divide a clock signal by 2 or 4
• Storage registers
• Communications
• High Performance Logic for test systems
• Latch-up performance
• Synchronous counter
• Load Control
• Data Synchronizers
• Test & Measurement