SN74ALS564BN

SN74ALS564BN Overview

20-DIP (0.300, 7.62mm)is the packaging method. As part of the package Tube, it is embedded. T flip flop uses Tri-State, Invertedas its output configuration. The trigger configured with it uses Positive Edge. The electronic part is mounted in the way of Through Hole. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is 0°C~70°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74ALS series. You should not exceed 30MHzin the output frequency of the device. In total, it contains 1 elements. It consumes 18mA of quiescent In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ALS564family includes it. Power is provided by a 5V supply. It belongs to the family of electronic devices known as ALS. There is an electronic component mounted in the way of Through Hole. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. There are 8bits in this flip flop. 8 circuits are used to achieve its superior flexibility. It runs on 5Vvolts of power. The D flip flop has no ports embedded. In order to ensure high efficiency, the supply voltage should remain at 5V. Its output current of 24mAallows for maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74ALS564BN Features

Tube package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS564BN Applications

There are a lot of Texas Instruments SN74ALS564BN Flip Flops applications.

• ESD performance
• Power down protection
• Storage Registers
• Balanced Propagation Delays
• Balanced 24 mA output drivers
• ESD protection
• Safety Clamp
• Supports Live Insertion
• Shift Registers
• Single Up Count-Control Line