MCP112T-240E/LB

MCP112T-240E/LB Overview

There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SC-70, SOT-323 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 3 pins. This power management has 3 pins. IC management can only work with a supply voltage of 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a 1.75μA supply current present in the power management. It is always advisable to use MCP112, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 1.75μA.

MCP112T-240E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP112T-240E/LB Applications

There are a lot of Microchip Technology MCP112T-240E/LB Voltage Supervisors applications.

• Transformer load monitoring equipment
• Kitchen appliances
• Medical-specific insulation monitor
• FPGA design
• Detection of phase loss
• Detection of phase imbalance
• Display equipment
• Urban rail transit weak current power monitoring
• WiFi router
• Power distribution systems of operating room