MAX6334UR23D3+T

MAX6334UR23D3+T Overview

There are 3 terminals on this power management that allow it to be mounted. Strip-packaging is used. In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 3 pins on the board. There are 3 pins on the power managment ic. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. The supervisor's supply current is specified to 3.3μA.

MAX6334UR23D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
3.3μA operating supply current

MAX6334UR23D3+T Applications

There are a lot of Maxim Integrated MAX6334UR23D3+T Voltage Supervisors applications.

• Solar power charger
• Household appliances
• Microprocessor system
• Data storage applications
• Leakage protection
• Automotive power systems
• Important electronics for automotive safety
• Efficient information transmission
• DSP
• Smart meter