MAX6316LUK46CY-T

MAX6316LUK46CY-T Overview

As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. To assist you, this PMIC includes SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 245 for the package during reflow. The supervisor is always powered by a 3V volt supply. When 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The supply current of the power management is 10μA. A similar IC managements number of the manufacturer can always be found by using MAX6316, the base power ics number.

MAX6316LUK46CY-T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MAX6316LUK46CY-T Applications

There are a lot of Maxim Integrated MAX6316LUK46CY-T Voltage Supervisors applications.

• External alarm
• Household appliances
• Set top box
• Magnetic resonance imaging
• Military communications
• Leakage current detection
• Automotive permanent magnet synchronous motors
• Consumer electronics
• Sensitive sensors
• Detection of phase imbalance