CY74FCT16374ATPVC

CY74FCT16374ATPVC Overview

48-BSSOP (0.295, 7.50mm Width)is the packaging method. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74FCT series. In total, there are 2 elements. There is a consumption of 500μAof quiescent energy. 48terminations have occurred. If you search by 74FCT16374, you will find similar parts. A voltage of 5V is used to power it. Input capacitance of this device is 4.5pF farads. In this case, the D flip flop belongs to the FCTfamily. It is mounted by the way of Surface Mount. 48pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. 16bits are used in its design. In order to achieve its superior flexibility, 1 circuits are used. In order for the device to operate, it requires 5V power supplies. The D flip flop is embedded with 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. Its output current of 64mAallows for maximum design flexibility. There are 3 output lines on it. There is a consumption of 5μAof quiescent current from it.

CY74FCT16374ATPVC Features

Tube package
74FCT series
48 pins
16 Bits
5V power supplies

CY74FCT16374ATPVC Applications

There are a lot of Texas Instruments CY74FCT16374ATPVC Flip Flops applications.

• Consumer
• Load Control
• Test & Measurement
• Convert a momentary switch to a toggle switch
• Storage registers
• Data Synchronizers
• ESD performance
• High Performance Logic for test systems
• Power down protection
• Guaranteed simultaneous switching noise level