74ACT825SC

74ACT825SC Overview

The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. In this case, the operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. The FPGA belongs to the 74ACT series. A frequency of 158MHzshould not be exceeded by its output. In total, it contains 1 elements. There is a consumption of 80μAof quiescent energy. The 74ACT825family includes it. The input capacitance of this JK flip flopis 4.5pF farads. Electronic part Surface Mountis mounted in the way. This board is designed with 24pins on it. This device has the clock edge trigger type of Positive Edge. An electronic part designed with 8bits is used in this application. The superior flexibility is achieved through the use of 8 circuits. For high efficiency, the supply voltage should be kept at 5V. To operate, the chip has a total of 8 output lines. A total of 8input lines have been provided. High level output current is set to -24mA. There is 24mA output current at the low level. If the operating temperature is lower than 85°C, it is recommended. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 4.5V. It supports the maximal supply voltage of 5.5V. A frequency of 158MHzcan be achieved.

74ACT825SC Features

Tube package
74ACT series
24 pins
8 Bits

74ACT825SC Applications

There are a lot of ON Semiconductor 74ACT825SC Flip Flops applications.

• Data Synchronizers
• Shift registers
• ESD performance
• Instrumentation
• Common Clocks
• Computing
• Matched Rise and Fall
• Frequency division
• ESD protection
• Single Down Count-Control Line